CV format · Electrical engineering
CV Format for Electrical Engineer: Sample You Can Copy
This is a ready-to-edit CV format for an electrical engineer: summary, experience, a graduate project, technical skills grouped by area, then education and licences. The sample is written for an engineer with about two years of experience, and the notes below show how a fresh graduate rearranges the same sections.
Download the Word or PDF file, or copy the text. Everything sits in one column so the reading order is the same on screen, on paper and in screening software.
By Subhan Shahid, founder of Resume Earth · Last updated
Page 1 of the electrical engineer file. Every name and detail is fictional.
Copy-ready sample
Electrical engineer: full sample text
Select the text, or use the copy button, and paste it into your own document. The Word and PDF files contain exactly this text in one column.
Fictional sample · replace every detail
Farhan Chowdhury
Electrical Engineer | LV Distribution and Maintenance
Dhaka, Bangladesh | +880 1700 000000 | farhan.chowdhury@example.com
Professional Summary
Electrical engineer with 2 years in low-voltage distribution, panel installation and preventive maintenance for a garment factory and a commercial contractor. Read single-line diagrams, carry out cable sizing and load calculations, and test installations before energising. Looking for a site or maintenance engineer role.
Experience
Assistant Engineer (Electrical)
Meghna Power Engineering Ltd, Dhaka | Feb 2025 - Present
- Supervise installation of LV panels, cable trays and lighting for a 9-storey office building with a connected load of about 1.2 MVA.
- Prepare cable schedules and voltage-drop calculations for 46 feeders and submit them for consultant approval.
- Carry out insulation resistance and earth continuity tests and record the results on test sheets before handover.
- Coordinate daily work for 2 foremen and 14 electricians.
Maintenance Engineer (Trainee)
Padma Textiles Ltd, Gazipur | Jan 2024 - Jan 2025
- Followed a preventive maintenance plan for 2 diesel generators, 3 transformers and the main distribution boards.
- Helped reduce unplanned electrical stoppages on one sewing floor from 9 to 4 per month by replacing worn contactors and re-terminating loose connections.
- Logged power factor readings each shift and reported when the capacitor bank needed attention.
Project
Automatic Power Factor Correction Panel (final year)
Team of 3 | 2023
- Designed and built a microcontroller-based panel that switched 4 capacitor steps and raised the test load power factor from 0.74 to 0.95.
Technical Skills
- Design: load calculation, cable sizing, voltage drop, single-line diagrams, AutoCAD Electrical (2D)
- Site and testing: LV panel installation, earthing, insulation resistance tester, clamp meter, relay basics
- Automation: PLC ladder logic (introductory), motor starters, VFD parameter setting
- Software: ETAP (basic load flow), MATLAB, MS Excel
Education and Licences
- BSc Electrical and Electronic Engineering, Buriganga University of Engineering, Dhaka | 2023 | CGPA 3.4 / 4.0
- Electrical supervisor licence (class ABC) | 2025
- Workplace electrical safety training, 16 hours | 2024
Why it is written this way
Section-by-section explanation
- Headline. The line under the name states the specialism. Electrical engineering covers power, building services, control and electronics, so say which one you work in.
- Summary. It names the voltage level, the type of site and the tasks you can do alone. A fresh graduate swaps this for an objective and moves education up to second place.
- Experience. Bullets give load, number of feeders, equipment counts and the tests performed. Those figures let a reader judge the size of the installation.
- Project. With two years of work, one line for the final-year project is enough. A fresher gives it three bullets: the design, the build and the measured result.
- Technical skills. Skills are grouped into design, site and testing, automation and software. Grouping makes it easy to match the CV against an advert for a design office or for a site role.
- Licences. Many countries require a supervisor or wireman licence for site work. Put the class and year where a recruiter can see them.
Opening lines
Summary lines by electrical specialism
- Fresher. Electrical engineering graduate with a final-year project on power factor correction and training in AutoCAD and basic PLC programming. Seeking a trainee engineer role in maintenance or building services.
- Building services. Electrical engineer with 3 years on commercial buildings, covering lighting, small power and LV distribution from shop drawings to testing and handover.
- Maintenance. Plant electrical engineer experienced in preventive maintenance of motors, drives, generators and distribution boards in a three-shift factory.
- Solar. Electrical engineer with experience sizing and commissioning rooftop solar systems up to 250 kWp, including string design and inverter configuration.
Copy and adapt
Bullet bank for electrical engineers
Design and drawings
- Prepared load schedules and selected breaker ratings for 6 distribution boards.
- Sized cables for motor feeders up to 75 kW, allowing for derating and voltage drop.
- Updated single-line diagrams to as-built status after site changes.
Installation and testing
- Supervised termination and glanding of armoured cables in the main switch room.
- Measured earth resistance at 8 pits and arranged treatment for 2 that exceeded the limit.
- Checked phase sequence and rotation before commissioning 12 pump motors.
Maintenance and reliability
- Scheduled monthly thermal scans of panels and tightened hot joints found in 5 locations.
- Kept spare parts stock for contactors, relays and fuses at an agreed minimum level.
- Wrote lock-out and tag-out steps for the generator changeover panel.
First job
Fresh electrical graduate? Rearrange the format like this
Use the same headings in a different order: objective, education, project, training, technical skills. The aim is to put your strongest evidence in the top half of the page.
- Open with an objective that names the area you want: power, building services, maintenance, control or solar.
- Expand the final-year project to three bullets and include a measured result.
- Add industrial attachment or internship, even if short, with equipment you worked near.
- List lab work that matches the job, such as machines lab, protection lab or PLC lab.
- Mention safety training, because employers are careful about sending new graduates to live sites.
Check before you send
Common mistakes and how to fix them
1. Not saying which branch of electrical work you do.
Fix: Add a headline such as 'LV Distribution and Maintenance' or 'Control and Instrumentation'.
2. Writing 'responsible for electrical works'.
Fix: Name the work: panels, cable trays, earthing, lighting, generators, and how much of it.
3. Leaving out voltage levels and ratings.
Fix: State LV, MV or HV and give kVA, kW or ampere figures where you know them.
4. Mixing software, soft skills and hobbies in one list.
Fix: Group technical skills under two to four short labels and keep the rest out.
5. Forgetting licences and safety training.
Fix: Give them their own lines with class and year.
6. Putting the CV in a table-based template.
Fix: Use one column of plain text. Tables and text boxes can change the reading order when a file is parsed.
7. Listing every lab experiment from university.
Fix: Keep the two or three that relate to the role you are applying for.
Where you are applying
Conventions by country
Electrical work is regulated differently from country to country. Check the advert and the local licensing body, and treat the notes below as a starting point.
- Bangladesh, India and Pakistan
- Employers often ask for a supervisor or wireman licence for site roles, alongside the degree grade. Trainee adverts may ask for a recent photo.
- Saudi Arabia, UAE and Qatar
- Site roles commonly ask for years of Gulf experience, the projects you worked on and, in Saudi Arabia, registration with the engineering council.
- Nigeria and Ghana
- Give your registration status with the national engineering regulator and list referees if the advert requests them.
- Philippines
- State whether you are a registered electrical engineer or a registered master electrician, with licence year.
- UK and Australia
- Name the wiring regulations or standard you were trained on and any site safety card you hold. No photo or date of birth is needed.
Questions
Frequently asked questions
What is the best CV format for an electrical engineer?
Reverse-chronological in one column: summary, experience, project, technical skills, education and licences. Fresh graduates move education and the project above experience.
What should an electrical engineer write in technical skills?
Group skills by area, such as design, site and testing, automation and software. Include only tools and tasks you can discuss in an interview, and add the level for software.
How long should an electrical engineer CV be?
One page for freshers and engineers with up to about three years of experience. Two pages are reasonable once you have several projects and employers to list.
Should I include my licence on an electrical engineer CV?
Yes. If you hold a supervisor, wireman or professional licence, list the class and year. For site roles it is often a screening requirement.
Can a fresher use this electrical engineer CV format?
Yes. Keep the headings, replace the summary with an objective, move education and the final-year project to the top, and remove the experience section or use it for internships.
Is the downloadable file editable in Word?
Yes. The .docx file is a normal Word document with real headings and bullet paragraphs, so you can type over every line. The PDF has the same content for reference.
Honest limits
What this sample can and cannot do
The engineer, employers, loads and results in this sample are fictional and were written to illustrate the format. Licence names differ by country, so use the exact title on your own certificate. A clear CV helps a reader see your experience quickly; it does not replace that experience or promise an interview.
Before you send your own version, run the finished file through the free ATS resume checker to see how its text is read.
Spotted an error on this page? Tell us and we will correct it.